BIOS SETUP
AC97 Audio
The default setting of the AC97 Audio is
Auto
.
CSA LAN (Giga-LAN)
The field enables or disables this Intel Giga B aseT Ethernet controller.
Init Display First
By default, the system initializes the PCI Slot VGA when the system
boots.
Onboard FDC Controller
Select
Enabled
if your system has afloppy disk controller (FDC)
installed on the board and you wish to use it. If you install a n add-in FDC
or the system has no floppy drive, select Disabled in this field. This
option allows you to select the onboard FD D port.
Onboard Serial/Parallel Port
These fields allow you to select the onboard serial and parallel ports and
their addresses. The default values for these ports a re:
Serial Port 1 3F8/IRQ4
Serial Port 2 2F8/IRQ3
Serial Port 3 3E8/IRQ11
Serial Port 4 Disabled/IRQ10
Parallel Port 378H/IRQ7
UART Mode Select
This field determines the UART 2 mode in your computer. The default
value is
Normal
. Other options inclu de
IrDA
and
ASKIR
.
Parallel Port Mode
This field allows you to determine parallel port mode function.
SPP Standard Printer Port
EPP Enhanced Parallel Port
ECP Extended Capabilities Port
PWRON After PWR-Fail
This field sets the system power status w hether
on or off
when power
returns to the syste m from a powe r failure situation.
42 2801550 User’s Manual