Intel manual Installation Instructions for Intel Pentium 4 mPGA478 Clips

English

Installation Instructions for Intel® Pentium® 4 mPGA478 Clips

Figure 1-1	Figure 1-2
C
B	A
	Figure 2

Figure 3-1 Figure 3-2

Figure 4

Figure 1

Please add an adequate layer of heat sink paste on the surface of the CPU(Figure1-1). Figure 1-2 showing the correct installation of the cooler atop the CPU.

Figure 2

Clip introduction--

Part A: Secured to the retention mechanism hook.

Part B: Tightly contact the cooler bracket.

Part C: Secured to the retention mechanism hook.

Figure 3

Secure Parts A, B, and then C of the clip to the retention mechanism. Assure that Part C is secured to the retention mechanism hook on the same side as the heat pipes.

Figure 4

Repeat the steps in “Power Installation and 3.5”

Fan Speed Controller Installation (Figure 2-1~Figure 4-2)”. The installation is now completed.

GH-PDU21-MF - 10 -