Intel mPGA478 manual Installation Instructions for P4 LGA775RM & Cooler, English

Installation Instructions for P4 LGA775RM & Cooler

English

Side A	ARM
	Side B
	CAM
	Figure 1
	Plastic
	Washers
	Figure 2

Figure3- 1Figure3-2

To install GH-PDU21-MF on LGA775 motherboard needs both LGA775 RM & P4 clips.

Please add an adequate layer of heat sink paste on the surface of the CPU.

Figure 1

Place the LGA775RM onto the LGA775 motherboard so that side A is parallel with ARM and side B is parallel with CAM.

Figure 2

From the underside of the motherboard, use screws (4) and plastic washers (4) together to secure the LGA775RM into place..

Figure 3

Gently push down on the cooler unit to lock it into position. (Figure3-1).Repeat the steps in “Power Installation and 3.5” Fan Speed Controller Installation (Figure 2-1~Figure 4-2)”. The installation is now completed.

GH-PDU21-MF provides manual fan speed control function. The fourth pin of the 4-pin CPU fan header does not necessarily have to be connected (Figure 3-2).

Note: About P4 Clips installation, please refer to “Installation Instructions for Intel® Pentium®4 mPGA478 Clips”

- 9 - GH-PDU21-MF