Intel mPGA478 manual Installation Instructions for AMD K7 Clip

English

Installation Instructions for AMD K7 Clip

				Figure 1
				Please add an adequate layer of heat sink paste on the
				surface of the CPU. Remove the bracket of the cooler along
Figure 1-1		Figure 1-2	Figure 1-3	the direction of the arrow (Figure 1-2). The bracket should
				be removed as that shown in Figure 1-3.
	A	B		Figure 2
				Place point A of the clip (Figure2-1)on point B at the bottom
		Figure 2-2	Figure 2-3	of the cooler(Figure2-2).As Figure 2-3.
Figure 2-1				Figure 3
				Align the three spaces on the cooler with the three clips on
				the base of the CPU and make sure point A of the clip
				(Figure 2-1) is placed on point B at the bottom of the cooler
			Figure 3	(Figure 2-2) and push down on the clip until it’s firmly
				locked.
				Figure 4
				Repeat the steps in “Power Installation and 3.5”
		Figure 4		Fan Speed Controller Installation (Figure 2-1~Figure 4-2)”.
				The installation is now completed.
	GH-PDU21-MF			- 12 -