Intel MPRTM4808 manual Installation3, 3.1Introduction, Location of IPMB1 and ICMB Connectors

Installation

Installation3

3.1Introduction

The Intel® NetStructure™ MPRTM4808 Rear Transition Board provides easy access to I/O signals of boards via the CompactPCI backplane.

Backplane I/O signals are available at connector J5. To connect System Management Bus 1 and the Chassis Management Bus to the board, the Intel MPRTM4808 board provides the Intelligent Platform Management Bus 1 (IPMB1) and Intelligent Chassis Management Bus (ICMB) connectors.

Figure 1. Location of IPMB1 and ICMB Connectors

Check that the items listed were shipped together with the accessory kit:

•Intel® NetStructure™ MPRTM4808 Rear Transition Board

•Installation Guide

If delivered as part of a system design, the Intel MPRTM4808 board is already installed in the system. For information on system connectors available for user-defined system configuration, refer to the respective system’s guide. The cabling of all other connectors of the Intel MPRTM4808 board must remain as configured at system delivery.

10 Intel® NetStructure™ MPRTM4808 Rear Transition Board Installation Guide