Installation
3.7.1ICMB Connector
The ICMB connector can be used to attach the Intel NetStructure MPCBL5525 System Master Board via the Intel MPRTM4808 board to other systems based on the IPMI. To monitor the overall system, the chassis can be connected via the Intel MPRTM4808 boards. The IPMI signals are routed from the CPU via the backplane to the Intel MPRTM4808 board and are then available on the ICMB connector.
The ICMB bus must be connected via a
The following figure shows how the pins are assigned.
Figure 17. ICMB Connector Pinout
3.7.2PS/2 Keyboard or Mouse
By using a keyboard/mouse splitter cable, you can use a PS/2 keyboard and a PS/2 mouse at the same time. The cable is included in the cable assembly kit. This cable may be obtained from Black Box Corporation (http://www.blackbox.com) or from other qualified vendors.
Figure 18. PS/2 Keyboard/Mouse Connector Pinout
Intel® NetStructure™ MPRTM4808 Rear Transition Board Installation Guide | 23 |