5: System Configuration

Integrated Peripherals

Main Section Functions

Configures the peripheral features integrated onto the motherboard.

Default & Autodetected Settings

Everything on this screen is an optimized default. The IDE transfer mode settings are autodetected. The system will work with these defaults. The port settings are standard PC settings.

Setting Options & Constraints

You can disable onboard devices and change port set- tings. If you install an IR port module, you have to set the “COM2 Mode Select” line to the appropriate IR setting. The last two lines configure a Smartcard reader.

CMOS Setup Utility – Integrated Peripherals

User’s Manual

5•15