28
PCA-6175 User's Manual
2.7 ATX Power Control Connectors(J7 and J1)

2.7.1 ATX feature connector (J7) and soft power

switch connector (J1)

The PCA-6175 can support an advanced soft power switch function if
an ATX power supply is used. To enable the soft power switch
function:
1. Take the specially designed ATX-to-PS/2 power cable out of the
PCA-6175's accessory bag.
2. Connect the 3-pin plug of the cable to J7 (ATX feature connector).
3. Connect the power on/off button to J1. (A momentary type of
button should be used.)
Important: Be sure that the ATX power supply can tak e at least
a 10 mA load on the 5 V standby lead (5VSB). If not,
you may have difficulty powering on your system.
Figure 2-1: Wiring for ATX soft power switch function