Intel manual 3Intel RAID Controller SASMF8I Characteristics, Card Layouts, Jumper Descriptions

3Intel® RAID Controller SASMF8I Characteristics

This chapter describes the characteristics of the Intel® RAID Controller SASMF8I. Figure 4 displays the connectors and headers on the controller and Table 1 describes them.

Figure 4. Card Layouts

Table 1. Jumper Descriptions

Jumper	Description	Type	Comments
J1	Drive Fault LED	8x2 header	LED signal support for front panel drive fault per
	header		port.
J2	Port activity LED	8 x 2	LED signal for activity per port.
	header	header
J4	Universal	4-pin	For factory and debug use
	Asynchronous	connector
	Receiver/
	Transmitter (UART)
J6	Internal SAS/SATA	SFF8087	Connection to SAS/SATA devices.
	port connector,
	ports 4-7
J7	Internal SAS/SATA	SFF8087	Connection to SAS/SATA devices.
	port connector,
	ports 0-3
J9	Keyed I2C	3-pin	Out-of-band enclosure management (SES2)
	connector	connector

13 Intel® RAID Controller SASMF8I Hardware Guide