3Updating the boot code and firmware, and installing device drivers
After you install the Fibre Channel Expansion Card, be sure that the latest boot code and firmware are installed. Then install the device drivers.
Note: For the latest information about supported operating systems, versions of device drivers, utilities, and documentation, go to http://www.intel.com/.
Installing the device drivers
The latest device drivers, utilities, documentation, and installation instructions for the following supported operating systems are provided at http://www.intel.com/:
•Microsoft Windows 2000* and 2003*
•Red Hat*Advanced Server Version 3, Update 5
•Red Hat Advanced Server Version 4
•SUSE* Linux Enterprise Server (SLES) Version 8.0
•SLES Version 9, SP1
7