Installation

1.Power off the computer and all drives, enclosures, and system components. Remove the power cord from the computer.

2.Remove the chassis cover and access the PCI Express add-in card slots. See your server chassis documentation for instructions.

3.Align the controller’s connector with a x4 or x8 PCI Express* slot on the server board.

4.Press down gently but firmly to ensure that the card is properly seated in the slot, as shown in Figure 1. Secure the bracket to the computer chassis.

AF000645

Figure 1. Inserting the Intel® RAID Controller SRCSAS144E into a PCI

Express* Slot

5.Connect the provided internal and/or external cables into the adapter using the 4-port combined end. Make sure the controller and cables are properly attached.

If using an external cable, plug the cable into the connector in the end bracket.

If using an internal cable, plug the cable into connector at the inside edge of the adapter.

7

Intel® RAID Controller SRCSAS144E Hardware Guide

Page 16
Image 16
Intel srcsas144e manual Installation