Intel® Solid-State Drive DC S3500
December 2013 Product Specification
328860-002US 27

Table 20. Device Statistics Log

Page Offset Description
Equivalent SMART
attribute (if
applicable)
0x40 Highest Average Long Term Temperature --
0x48 Lowest Average Long Term Temperature --
0x50 Time in Over-Temperature --
0x58 Specified Maximum Operating Temperature --
0x60 Time in Under-Temperature --
0x68 Specified Minimu m Operating Temperatur e --
0x06 – Transport Statistics
0x08 Number of Hardware Resets --
0x10 Number of ASR Events --
0x18 Number of Interface CRC Errors --
0x07 – Solid State Device Statistics 0x08 Percentage Used Endurance Indicator
E9h
Note: This device statistic
counts from 1 to 150
5.6 SMART Command Transport (SCT)

With SMART Command Transport (SCT), a host can send commands and data to an SSD

and receive status and data from an SSD using standard write/read commands to

manipulate two SMART Logs:

− Log Address E0h ("SCT Command/Status") — used to send commands and retrieve status
− Log Address E1h ("SCT Data Transfer") — used to transport data

Intel SSD DC S3500 supports the following standard SCT actions:

− Write Same — DC S3500 implements this action code as described in the ATA specification
− Error Recovery Control — DC S3500 accepts this action code, and will store and return
error-recovery time limit values
− Feature Control - DC S3500 supports feature code 0001h (write cache) feature co de 0002h
(write cache reordering), and feature code 0003h (time interval for temperature logging). It
also supports D000h(Power Safe Write Cache capacitor test interval), (D001h(read/write power
governor mode), D002h(read thermal governor mode), D003h(read power governor burst
power), D004h(read power governor average pow er)
− Data table command - DC S3500 supports data table command as specified in ATA8-ACS2. This
will read out temperature logging information in table ID 0002h
− Read Status Support - DC S3500 supports read status log
5.7 Data Set Management Command Set

Intel SSD DC S3500 supports the Data Set Management command set Trim attribute,

which consists of:

− DATA SET MANAGEMENT
5.8 Host Protected Area Command Set

Intel SSD DC S3500 supports the Host Protected Area command set, which consists of:

− READ NATIVE MAX ADDRESS
− SET MAX ADDRESS
− READ NATIVE MAX ADDRESS EXT
− SET MAX ADDRESS EXT

Intel SSD DC S3500 also supports the following optional commands:

− SET MAX SET PASSWORD