11
1. By turning the power on while pressing the SEL button the printer will
print the current configuration and get in SET-UP mode.
2. Thepower LE D will flash every second to indicate the printer is in SET-
UP mode.
3. By pressing the FEED button, in SET-UP mode, you can scroll through
the printer parameters in the order shown in the table below.
4. Pressing the SEL button will cause the setting of a parameter to
change in the sequence shown below.
5. Once the desired setting is selected, it can be saved by pressin g the
SEL button while pressing the FEED button.
NOTE: IF NO BUTTONS ARE PRESSED FOR 15 SECONDS, THE SET-UP
MODE IS AUTOMATICALLY TERMINATED WITHOUT CHAN GING THE
ORIGINAL PARAMETERS.
PARAMET ER (FEED Button) STATUS (SELButton)
8BIT DATANUMBER OF DATABIT S
7BIT DATA
NO PARITY
ODD PARITY
SERIALPARITY
EVEN PARITY
2400 BAUD
4800 BAUD
9600 BAUD
SERIALBAUD R ATE
19200 BAUD
U.S.A.
FRANCE
GERMANY
U.K.
DENMARK I
SWEDEN
ITALY
SPAIN
JAPAN
NORWAY
CHARACTERSET
DENMARK II
TEXT(NORMALPRINT)PRINTMODE
DATA(INVERTEDPRINT)
5MIN
1MIN
AUTOPOW ER OFF
DISABLE
STANDARD(DH1000)
CITIZEN 560
EMULATION
ESC/POS
NORMALDTR
INVERTED
8.2 Set-up Through the Data Port