Intelligent Motion Systems om-192-s 3. Setting up the printer

Z: Designates input voltage for the external power adaptor

Blank 110VAC WA Without adaptor

220 220 –240VAC SMPS 90-240VAC

3. Setting up the printer

3-1. Unpacking.

The items illustrated below are included with your printer. If any items are

damaged or missing, please contact your dealer for assistance.

Printer, Paper Roll, Power Supply, Ribbon (installed), Manual, and Interface

Cable.

Printer Paper roll

PowerA dapter Interface Cable

3-2. Selecting a Place

Contents

Main 1. INTRODUCTION 2. SPECIFICATIONS 2-1. General specifications. 2-2. Printer types and models: 3. Setting up the printer 3-3 Connecting the Power Adapter 3-4 Connecting the Interface Cable 3-5 Installing the Ribbon Cartridge 3-6 Loading Paper 4. External Appearance. 5. Control Panel 6. Running the Self Test 7. Default settings 8. Set-up mode 8.1 Set-up By Control Pa nel Buttons 8.2 Set-up Through the Data Port 8.3 NVR COMMS 8.4 Diagnostic Mode 9. Accessories 10. Troubleshooting 11. Interface connections Page 12. COMMAND CODES 12.2 COMMAND SUMMARYFOR EPSON ESC/POS EMULATION 12.3 COMMAND SUMMARY FOR CITIZEN 560 EMULATION 11.2COMMAND DESCRIPTIONS 11.2.1 COMMAND DESCRIPTION FOR DH1000 EMULATION 11.2.2EPSON ESC/POS COMMAND DESCRIPTION Page 11.2. 3 APPENDIX 1. INTERNATIONAL CHARACTERS SET