Intelligent Motion Systems om-192-s 4. External Appearance.

Rollpaper

Covertop

Papercover

Botto m cover

Rollpaper

Top cover

On Off

Control panel

4. Hold the both edges of the paper and insert it straight into the paper slot.

5. P ress the FEED button until approximately two inches of paper is fed

through the mechanism.

6. Tearthe excess paper against the serr ated edge and close the cover.

7. Use the following Omniprint part number to reorder paper:

PP-225-135 1 ply paperroll

PP-225-90WC 2 plypaper roll

4. External Appearance.

Paper rollholder

Contents

Main 1. INTRODUCTION 2. SPECIFICATIONS 2-1. General specifications. 2-2. Printer types and models: 3. Setting up the printer 3-3 Connecting the Power Adapter 3-4 Connecting the Interface Cable 3-5 Installing the Ribbon Cartridge 3-6 Loading Paper 4. External Appearance. 5. Control Panel 6. Running the Self Test 7. Default settings 8. Set-up mode 8.1 Set-up By Control Pa nel Buttons 8.2 Set-up Through the Data Port 8.3 NVR COMMS 8.4 Diagnostic Mode 9. Accessories 10. Troubleshooting 11. Interface connections Page 12. COMMAND CODES 12.2 COMMAND SUMMARYFOR EPSON ESC/POS EMULATION 12.3 COMMAND SUMMARY FOR CITIZEN 560 EMULATION 11.2COMMAND DESCRIPTIONS 11.2.1 COMMAND DESCRIPTION FOR DH1000 EMULATION 11.2.2EPSON ESC/POS COMMAND DESCRIPTION Page 11.2. 3 APPENDIX 1. INTERNATIONAL CHARACTERS SET