20
11.2. 3 COMMANDDESCRIPTION FOR CBM560 EMULATION
LINE FEED (0AH) : Prints the data in the print buffer and feeds one line.
FORM FEED(0CH) : Form feeds after printing. This is fixed at three lines.
CR(0DH) : Feeds a new line after printing.
REVERSE PRINT(14H) : This command causes the printer to print white on black. You can
toggle between reverse and normal anywhere on a line but the reverse pr int mode will
automatically be terminated at the end of a line.
CLEAR BUFFER(18H) : All the data in the print buffer, received prior to this command, will be
cleared; however, this code is treated as data in the graphics mode.
DOUBLE WIDTH(1EH) : Upon receiving this command the printer will go in the double wide
mode and remains in this mode until terminated by the sing le wide or LF command or
completionof the current line. If the last character of a line is double wide but there is room only
fora single wide character, it will be printedin single width.
SINGLE WIDTH(1FH) : Printer reverts back to single width printing. Single and doublewide
characters can be combined anywhere on a li ne.
APPENDIX 1. INTERNATIONAL CHARACTERS SET