Inter-Tel INT1400 ABOUT THE TELEPHONE SYSTEM

FINDING YOUR WAY

INT1400 Cordless Telephone User Guide

The ability to change your ring tone is helpful in close-quartered environments. If

your ring tone is unique, you can quickly identify when a call is ringing on your end-

point.

To select the type of ring tone for your endpoint:

On standby mode, press on the side of the handset until you hear the

desired ring type. There are three ring tones and vibrate ringer available.

NOTE: When your endpoint is set to vibrate and the handset is charging in the base,

the endpoint rings when a call comes in and the call is answered when you lift the hand-

set off of the base.

You can temporarily turn the handset ringer off.

To turn the ringer off:

In standby mode, press and hold on the side of handset for two seconds.

The Ring Off ( ) icon appears in the display.

You can return your endpoint to default levels at any time. This feature returns vol-

umes to default levels; cancels Do-Not-Disturb, and manual call forwarding.

To return your endpoint to default:

Dial .

ABOUT THE TELEPHONE SYSTEM

As you can see, your INT1400 and Inter-Tel telephone system come equipped with a

lot of “bells and whistles.” To help you understand what everything means, it is rec-

ommended that you read the following information before you use your phone:

• Your telephone system may be programmed for one or two dial tones. Systems

with two dial tones have one for intercom calls and one for outside calls.

• Many features “time out” if you wait too long before performing the next step. If

this happens, you must hang up and start again.

RING/VOL

3 9 4