Inter-Tel INT1400 Setting Up Follow Me, Using Call Waiting, Performing a Hookflash During a Call

USING YOUR PHONE

INT1400 Cordless Telephone User Guide

Setting Up Follow Me

To set “follow me” from the INT1400 on another extension in the phone system:

1. Press TALK. (Display shows DIAL, OR SELECT OPTION.)

2. Dial feature code 735. (Display shows ENTER SOURCE EXTENSION.)

3. Dial the extension of the phone you want to receive calls for. (Display shows the

number you dialed.)

4. Dial the three digit password. (D isplay shows FORWARD SET.) You will hear

three beeps before the phone returns to an idle state.

To cancel “follow me” from the INT1400 on another extension in the phone

system:

1. Press TALK. (Display shows DIAL, OR SELECT OPTION.)

2. Dial feature code 735. (Display shows ENTER SOURCE EXTENSION.)

3. Dial the extension of the phone you want to receive calls for. (Display shows the

number you dialed.)

4. Dial the three digit password. (Display shows FORWARD CANCELLED.) You

will hear three beeps before the phone returns to an idle state.

NOTE: When Follow Me has been set on the Uniden extension, from another exten-

sion, the Uniden phone alerts the user to this by presenting stuttered dial tone, when

TALK is pressed. No visual display is given.

To cancel “follow me” from the another extension in the phone system to an

INT1400:

1. Press TALK. (Display shows DIAL, OR SELECT OPTION.)

2. Dial feature code 732 to cancel forwardin g all calls. (Display shows FOR-

WARDING CANCEL)

Using Call Waiting

To set call waiting tone protection before a new call:

1. Press TALK. (Display shows DIAL, OR SELECT OPTION.)

2. Dial feature code 725. (Display shows TONE PROTECT ENABLED.)

3. Dial your number.

Performing a “Hookflash” During a Call

To send a hookflash to the external line:

1. On an active call, press XFER. (Display shows DIAL, OR SELECT EXTN.)

2. Dial feature code 731. (Display shows FLASH SENT.) The hookflash was sent

to the external line and the call continues.