HOLDING AND TRANSFERRING CALLS
The methods used for these functions are dependent on your system type, so you will need to check your system's Extension User
Guide. The RECALL KEY is typically used to initiate holding and/or transferring calls.
USING THE MEMORIES
You can store many different numbers and/or codes in the memories. For example it might be useful to store some of your favourite
network facility commands in the telephone for fast and convenient access to those facilities (e.g. call diversion, call forward, call
back etc). Consult your system's Extension User Guide for the codes to these facilities.
6. MEMORY FEATURE OPERATION
Located at the top of the keypad, the
facility commands. Each memory can store up to 32 digits including digits 0 to 9, the , # , Pause and Recall commands. While in
the memory storing process the dial tone may change to disconnect tone before completing the storing procedure. You can ignore
this disconnect tone and continue to complete the storing procedure.
STORING A NUMBER:
1.Lift HANDSET or press HANDSFREE / HEADSET KEY
2.Press STORE
3.Enter the telephone number or the network facility command code
4.Press STORE
5.Press desired memory key
6.Replace HANDSET or press HANDSFREE / HEADSET KEY
14
