Invacare®Tarsys®Elevating Seat for 3G Storm Series Power Wheelchairs
14
Specifications
Dimensions
Overall
Seat width 12" – 15",* 16" – 22" (1" increments)
Seat depth 12" – 15",* 16" – 22" (1" increments)
Length 45" with standard
front riggings
Width 25"seat <18"
Front seat-to-floor height**
Standard 19"
With PTO 20"
Consumer weight capacity
Standard 300 lb.
With PTO 250 lb.
*Elevating Set is available in Junior set sizes (12"-15") through specials. Elevating and PTO are not available in Junior
sizes.
** Measured w/ASBA seat at 0˚ tilt and 12" drive wheels.
FEATURES
•Assists in making transfers safer and easier as well as enhancing many
social/psychological experiences
•Provides up to 6 inches of vertical lift
•Low seat-to-floor height of 19 inches and 20 inches with PTO (optional) at 0
degrees of tilt
•Driving while elevated at an automatically reduced speed of 20% of the
maximum for added stability
•Raised and lowered through a toggle switch mounted to the seat armrest
(standard),or with TAC,through the joystick (optional–available with
MKIV™A electronics)
•Available with either ASBA or van seat
Fully elevated.
Fully elevated with with PTO at 20˚ of tilt.
Invacare®Tarsys®Elevating Seat for 3G Storm Series®
PowerWheelchairs
Designed to provide consumers with improved independence and assistance to perform daily living
activities,such as transfer assistance or reaching for objects on shelves, the Tarsys®Elevating Seat is
a long-awaited necessity.The Tarsys Elevating Seat is incorporated into the Invacare®3G Storm
Series®power wheelchair bases (Arrow®,Ranger X™and Torque™SP). In addition,the Elevating
Seat can be ordered with the Tarsys®Power Tilt Only (PTO) powered seating system,providing a
multi-functional solution.