As the Invacare 2GR reclines from 90° to 175°, the system shifts along the base and optional active anti-tippers are extended to help maintain stability.

Back cane design allows for the simple attachment and height adjustment of accessories.

Standard on the 2GR is the mechanically elevating legrest system, which consists of two push rods acting with the recline motion to elevate the legrests. This system interfaces with either the Genius articulating/elevating legrests or the AT5544 basic elevating legrests.

To elevate the legrests without reclining, upgrade to the power-elevating legrests.

The 2GR easily interfaces with the Invacare Storm Series Arrow FWD power base (shown in full recline).

Articulating ventilator tray can be easily added to any 3G Storm Series base or the Arrow FWD base.

Standard on the 2GR, the TAC (two-actuator control) provides control of any combination of two actuators through a variety of options: 1) Through-the-driver control – accomplished through programming of the MKIV, with no additional components. 2) 4-way toggle – provides user control or can act as an attendant control. 3) Any two ability switches – can be plugged into the mono jacks on the TAC to control the actuators. The TAC also can be programmed to limit the tilt/recline range, drive lockout, acceleration, deceleration and actuator speed.

7

Invacare® Tarsys® 2GRPower Recline Seating System

Page 7
Image 7
Invacare 00-313 manual Invacare Tarsys 2GR Power Recline Seating System