Technical Advice

Operating the 2GTilt and Recline functions through MKIVelectronics

FOR THE TARSYS 2GT TILT SYSTEM

The 2GT is a one-actuator system that comes with the single-function toggle as the standard electronics. For operation through the driver control or ability switches, upgrade to the TAC.

Tarsys 2GTPower Tilt Seating System

FOR THE TARSYS 2GR RECLINE SYSTEM

The 2GR has two actuators: one for recline and one forVSR (Power Shear Reduction). The newTAC (two-actuator control) is standard on the 2GR and allows operation of the recline andVSR through the 4-way toggle,through the driver control, or with standard ability switches, with no need for additional components.

Operation through the driver control requires programming of the MKIV, while ability switches can be plugged directly in to theTAC’s 1/8'' mono jacks. With either option, the 4-way toggle should still be used as an attendant control and drive lockout indicator. If power-elevating legrests are needed, you must upgrade to theTRCM.

Tarsys 2GRPower Recline Seating System

 

FOR THE TARSYS 2GTR TILT AND RECLINE SYSTEM

 

The 2GTR is a multi-actuator system which can interface with tilt,

 

recline, VSR (Power Shear Reduction) and optional powered leg

 

actuators. The standardTRCM (Tilt Recline Control Module) permits

 

driver-control operation simply by programming the MKIV. The system

 

can also be operated through the 4-way toggle or any MKIV A-level

 

driver control, with no need for additional parts.

 

When the chair is operated through the driver control, the 4-way toggle

 

should be used as an attendant control and as a drive lockout indicator.

 

To control using standard ability switches, a switch adapter such as the

 

Tash CA5 or ASL 502 can be plugged in to theTRCM’s D-9 port,

Tarsys 2GTRPower Tilt and Recline Seating System

allowing control of tilt/recline by up to 4 switches.

Tarsys 2G Tilt and Recline Specials*

Due to the nature of providing custom rehab products, we realize that at times your consumers may have needs outside of our standard product offering. We can accommodate some of these custom configurations through our Specials Department. Below are a few common specials. Please contact Invacare Customer Service for specific availability, pricing and lead times.

Specials number

Product

Application

 

SM-011203084006

2GR, 2GTR

For consumers who require fuller back support, theVSR actuator can be limited in range to allow

 

 

 

the Curved ABS back to be made longer. (Provide actual length of ABS back needed. This will

 

 

 

reduce VSR travel from 5".)

 

C-010418024954

2GR, 2GTR

For consumers who require full/custom back support, theVSR actuator can be removed and

 

 

 

round canes used to interface with aftermarket backs.

 

SM200109053220

2GT, 2GR, 2GTR

To achieved widths of 23" or 24".

 

SM010524104826

2GT

For consumers who require a round back cane height shorter than 20".

 

C-200410040947

PTO on ProntoR2

For consumers who prefer the center-pivot style front riggings.

*May not be available with some configurations.

Invacare Corporation

www.invacare.com

USA

One Invacare Way Elyria, Ohio

44035-4190

(800) 333-6900

Canada

570 Matheson Blvd. E. Unit 8 Mississauga, Ontario L4Z 4G4 Canada (800) 668-5324

Invacare,Arrow, Storm Series and Tarsys are registered trademarks and Yes, you can., 2GT, 2GR, 2GTR, HexaFlex, Pronto, Ranger X,Torque, MKIV and

TTdesign are trademarks of Invacare Corporation. Specifications are subject to change without notification.

© 2002

Invacare Corporation Form No. 00-313 Rev. 09/02

‘‘Invacare says ‘Yes, you can,’ and I couldn’t have said it better myself.’’

Page 16
Image 16
Invacare 00-313 manual Technical Advice, Tarsys 2G Tilt and Recline Specials