Invacare 1094953 Detail “A” - Top View, Rear Armrest Socket Installation On Wheelchairs Built

Conventional Armrest Sockets (FIGURE 5)

Conventional Kit No. 1094953 includes the following:

DESCRIPTION	QTY.
Armrest Bracket	2
Bracket Spacer	2
Front Armrest Socket	2
Rear Armrest Socket	2
Coved Armrest Spacer	2
TubeSupports	2
Nylon Washers	2
Long Hex Screw	2
Medium Hex Screw	2
Short Hex Screw	2
Locknuts	4
Hex Locknut	2

1.Position armrest bracket into mounting position. Re- fer to Owner’s Manual for proper mounting positions.

2.Install armrest bracket onto wheelchair frame and secure using short hex screw and locknut.

3.Insert the tube support into the armrest socket ensur- ing that the holes in the tube support align with the holes in the armrest socket.

4.Install the armrest socket into the armrest bracket.

NOTE: Mounting hardware must be installed in the oreintation shown in FIGURE 5.

5.Install long hex screw through armrest socket, tube support, coved armrest spacer, washer, armrest bracket, spacer and armrest bracket as shown in DE- TAIL“A”.

NOTE: Ensure armrest socket is flush in coved spacer.

		6.	Secure with locknut.
		7. Repeatthisprocedurefortheoppositesideofthechair
	DETAIL “A” - TOP VIEW		frame.
	LEFT	RIGHT
Tube	Wheelchair	Armrest
	Frame	Socket
Support		Hex
	Spacer
		Screw
Coved	Armrest	Coved
	Bracket
Armrest		Armrest	Armrest
Spacer		Spacer	Bracket
		Spacer
		Tube Support
			Locknut
		Armrest
		Socket

Long		Washer
		Coved
Hex		Armrest	Wheelchair
Screw	Short	Spacer	Frame
	Hex
	Screw

FIGURE 5 - REAR ARMREST SOCKET INSTALLATION ON WHEELCHAIRS BUILT

AFTER 7/00 - CONVENTIONAL ARMREST SOCKETS

5