REAR ARMREST SOCKET INSTALLATION ON WHEELCHAIRS BUILT AFTER 7/00
Space Saver Armrest Sockets (FIGURE 4)
2.Install armrest bracket onto wheelchair frame and secure using short hex screw and locknut. Securely tighten.
3.Insert the tube support into the armrest socket ensur- ing that the holes in the tube support align with the holes in the armrest socket.
Space Saver Kit No. 1094952 includes the following: 4. Install the armrest socket into the armrest bracket.
DESCRIPTION | QTY. |
|
|
Armrest Brackets | 2 |
Front Armrest Sockets | 2 |
Rear Armrest Sockets | 2 |
TubeSupports | 2 |
Nylon Washers | 4 |
Long Hex Screw | 2 |
Short Hex Screw | 6 |
Locknuts | 6 |
Hex Locknut | 2 |
|
|
1.Position armrest bracket into mounting position. Re- fer to Owner’s Manual, supplied with the wheelchair, for proper mounting positions.
NOTE: Mounting hardware must be installed in the oreintation shown in FIGURE 4.
5.Install short hex screw through armrest bracket, washer, armrest socket, tube support, washer and armrest bracket as shown in FIGURE 4.
6.Secure with locknut.
7.Install remaining short hex screw (used as armrest stop) through armrest bracket and secure with lock- nut.
8.Repeatthisprocedurefortheoppositesideofthechair frame.
MOUNTING HOLES
Armrest
Socket
Armrest Stop
Armrest Bracket
Tube Support
Armrest
Socket
Washer
Armrest
Bracket
Tube Support
Armrest
SocketShort Hex
Screw
Washer
Armrest | Wheelchair | |
Bracket | ||
Frame | ||
|
Locknut
Short Hex
Screw
FIGURE 4 - REAR ARMREST SOCKET INSTALLATION ON WHEELCHAIRS BUILT
AFTER 7/00 - SPACE SAVER ARMREST SOCKETS
4
