Invacare 1183379-A user manual Maintenance, Troubleshooting, Technical Data

I-Transia™

3.Lower the vertical poles to the lowest position. Refer to 3.6 Adjusting the Height, page 5 .

4.Reverse the assembly steps to disassemble the system. Refer to 3.3 Assembling the Freestanding Rail, page 3 .

It may be necessary to push the top bracket upwards in order to separate it from the vertical pole module.

4.2 Transport

1.Disassemble the freestanding rail system. Refer to 4.1 Disassembly, page 5 .

2.Put the components of the system into the portable carrier bag (optional accessory).

4.3 Storage

CAUTION!

Risk of Product Damage

–The freestanding rail system should be stored in a room where the humidity does not exceed 70%.

–Do not store the system in a bathroom.

5 Maintenance

5.1 Cleaning

CAUTION!

Risk of Product Damage

–DO NOT autoclave or use harsh chemicals when cleaning the system.

Clean the freestanding system with a damp cloth using ordinary household detergents and household disinfectant.

To prevent cross-infection, the parts of the hoist that come in contact with caregivers and patients must be cleaned and disinfected. A soft cloth, dampened with water and a small amount of dish liquid, is all that is needed to clean the hoist, lifting strap and carabiner. The hoist can be cleaned with non-abrasive cleaners.

6 Troubleshooting

6.1 Troubleshooting Table

PROBLEM	SOLUTION	PROCEDURE
The system is not	Check that the	Refer to 3.3
stable.	feet are mounted	Assembling the
	correctly.	Freestanding Rail,
		page 3 .
	Check the vertical
	poles are pushed
	securely into the top
	bracket.
	Check that the rails
	are level.
	Check that the
	top brackets are
	tightened.
	Check that the top
	brackets have been
	positioned correctly.
	Check that the
	yellow thumb
	screws are
	tightened.
	Check the top brackets for defects or
	deformities. If found, contact an Invacare
	dealer or certified technician.
The height	Using the 5 mm	Refer to 3.6
adjustment is not	Allen key, check that	Adjusting the Height,
working.	the vertical pole is	page 5 .
	not stuck in the far
	end position.
	If the top part of the vertical pole is not
	moving when turning the Allen key, stop
	using the system and contact an Invacare
	dealer or certified technician.

7 Technical Data

7.1 Typical Product Parameters Freestanding rail system

Minimum Dimensions	2020 x 2720 mm (79.5 in x 107 in)
(HxW)
Maximum Dimensions	2820 x 3890 mm (111 in x 153 in)
(HxW)
Maximum lifting	250 kg (550 lb)
capacity

Total weight without hoist

Freestanding rail	52.0	kg (114.5 lb)
system
Vertical pole, each	13.5	kg (30	lb)
Top brackets and rail	25.0	kg (55	lb)

Materials

Rails and posts	Anodized aluminum
Feet	Powder varnished steel
Brackets	Powder varnished steel

6 1183379A