DETAIL “A” - MODEL 6905A | DETAIL “B” - MODEL 6905A | ||
MANUFACTURED BEFORE | MANUFACTURED AFTER | ||
04/01/2002 |
| 04/01/2002 |
|
Recliner Frame | Rivets | Recliner Frame | Bolts |
|
| ||
|
|
| |
|
| Bolts |
|
Rivets |
|
|
|
Rivets
Bolts
NOTE: Side panel not shown to show rivet locations.
DETAIL “C” - REMOVING SIDE COVER MODELS 6907A AND 6908A
Bolts
FIGURE 2 - INSTALLING THE SCISSOR MECHANISM GUARD
4.Remove four (4) existing bolts A, B, C and D from side frame as shown in FIGURE 3.
5.Position scissor mechanism guard against the side frame with the folded edge down. Refer to FIGURE 3.
6.Align holes of scissor mechanism guard with holes on side frame.
7.Secure scissor mechanism guard to side frame with existing bolts A, B, C, and D.
8.Perform one (1) of the following:
A.FOR MODEL 6905A BUILT BEFORE 04/01/2002 - Install new side panel with kit no. 1109705 and using instruction sheet no. 1109704.
B.FOR MODEL 6905A BUILT AFTER 04/01/2002 - Secure the side cover to the recliner frame with the eleven (11) bolts. Refer to DETAIL “B” in FIGURE 2.
C.FOR MODELS 6907A, 6908A - Secure the side cover to the recliner frame with the four (4) bolts. Refer to DETAIL "C" in FIGURE 2.
3
