Power |
|
| Power Unit Air | |
|
| |||
|
|
| Hose Quick | |
Unit |
|
|
| |
|
|
| Disconnect | |
|
|
|
| |
|
|
|
|
|
Cushion
Fittings
Transport Mat
Cushion
Mattress Air Hose
Quick Disconnect
Power
Unit
Knob
CPR Plugs
| +MAX |
Power | Setting |
Switch | Setting |
FIGURE 2- INFLATING THE MATTRESS
INSTALLING/REMOVING THERAPY PAD (FIGURE 3)
INSTALLING
1.Position therapy pad over mattress.
2.Insert one (1) of the ten (10) straps into open latch as shown in FIGURE 3.
3.Pull strap until therapy pad fits tight around mattress.
4.Push down on latch to secure.
5.Repeat STEPS 2 - 4 for remaining nine (9) straps.
6.Secure mattress base to the bed frame. Refer to SECURING MATTRESS BASE TO BED FRAME in this instruction sheet.
REMOVING
Strap
Latch
1.Remove patient from bed.
2.Pull up on one (1) of the ten (10) latches that secure the therapy pad to the mattress.
3.Remove strap from latch.
FIGURE 3 - INSTALLING/REMOVING
THERAPY PAD
4.Repeat STEPS 2 - 3 for remaining nine (9) latches.
5.Remove therapy pad from mattress.
|
|
|
|
Part No. 1078996 Rev. B | 3 | INVACARE 8000 PRESSURE MATTRESS | |
