Invacare CG8000 instruction sheet Deflating Mattress Figure, Standard Deflation

Power Unit

Power Switch

Knob

+MAX Setting

-MIN

Setting

FIGURE 5 - PLACING PATIENT ON MATTRESS

AND ADJUSTING FIRMNESS

DEFLATING MATTRESS (FIGURE 6)

NOTE: Alternating cushions are connected together to form a chamber. The mattress consists of
two (2) chambers.	DETAIL “A”
STANDARD DEFLATION
	Power Unit
1. Remove therapy pad. Refer to
		Power Unit Air Hose
INSTALLING/REMOVING
THERAPY PAD in this instruction sheet.		Quick Disconnect
2. Disconnect the two (2) power unit air
hose quick disconnects from the two (2)
mattress air hose quick disconnects as
shown in DETAIL “A”.	Mattress Air
3. Fold the mattress in half to force the air out.
	Hose Quick
4. Before re-inflation is possible, connect	Disconnect
the two (2) power unit air hose quick		Manifold
disconnects to the two (2) mattress air
hose quick disconnects.			CPR
5. Inflate the mattress. Refer to
			Straps
INFLATING THE MATTRESS in
this instruction sheet.
RAPID (CPR) DEFLATION
	CPR Plugs
1. Pull the two (2) CPR straps labeled
“PULL CPR” away from mattress.

NOTE: Using the “PULL CPR” straps will disconnect the CPR plugs from the manifold, which allows the two (2) chambers to deflate.

2.Before re-inflation is possible, install the CPR plugs on the CPR straps into the fittings on the manifold.

3.Inflate the mattress. Refer to

INFLATING THE MATTRESS in FIGURE 6 - DEFLATING MATTRESS this instruction sheet.

Part No. 1078996 Rev. B 5 INVACARE 8000 PRESSURE MATTRESS