Manuals / Tripp Lite / Computer Equipment / Power Supply

Tripp Lite SU6000RT3UPM Specifications, 93-1979, Model, SU10KRT3U, Input, Output, Operation

Models: SU6000RT3UPM SU6000XFMR SU10KRT3UPM SU10KXFMR BP240V10RT3U BP240V7RT3U

1 17

Download 17 pages 21.98 Kb

Page 17

Specifications

Specifications are for UPS, Isolation Transformer, and one battery pack.

Model		SU6000RT3U	SU10KRT3U
Input
UPS Input Voltage		156V~276V Single Phase	156V~276V Single Phase
Transformer Input Voltage		200/208/220/230/240V	200/208/220/230/240V
Input Frequency		50/60 Hz ± 3 Hz	50/60 Hz ± 3 Hz
Input Current		22.6A	40A
Inrush Current		<150A	<200A
Power Factor (Full Load)		>0.97	>0.97
Efficiency (Full Load/On-Line)		>87%	>88%
UPS Circuit Breaker		40A	63A
Transformer Circuit Breaker		40A (2 pole)	63A (2 pole)
Output
VA		6000	10000
Watts (Power Factor: 0.7)		4200	7000
Waveform (On-Line)		Sinewave	Sinewave
Waveform (On-Battery)		Sinewave	Sinewave
Output Voltage (RMS)		120/200/208/220/230/240V	120/200/208/220/230/240V
Output Frequency		50/60 Hz	50/60 Hz
		(± 0.2 Hz on battery)	(± 0.2 Hz on battery)
Voltage Regulation		±3%	±3%
Max. Harmonic Distortion
	(Linear Full Load)	<3%	<3%
	(Non-Linear Full Load)	<6%	<6%
Overload Capabilities		102% (continuous)	102% (continuous)
		102%~125% (1 min.)	102%~125% (1 min.)
		125%~150% (30 sec.)	125%~150% (30 sec.)
		>150% (Immediate)	>150% (Immediate)
Short Circuit Capability		90A*	160A*
UPS Circuit Breaker		40A	63A
Transformer Circuit Breaker		30A (3 pole)	63A (3 pole)
Crest Factor		3:1	3:1

*The short circuit capability at 1ø 2W 120V for the SU6000RT3U is greater than 180A, and for the SU10KRT3U is greater than 320A.

Operation
On-Line Transfer Time
(Line to Battery, Battery to Line)	0 ms	0 ms
Audible Noise (Full Load @ 1 m)	<50 dBA	<55 dBA
Typical Backup Time (Single Battery Pack)
(Full Load)	10 min.	6 min.
(Half Load)	25 min.	15 min.

Indicators

Includes an LCD Display and LEDs (I/P (input), BATTERY, AC/DC, BYPASS DC/AC, O/P (output)).

Communications

Includes an RS-232 DB9 female connector, a dry contact DB9 female connector and an accessory slot.

Physical Specifications
(H × D × W)	51/8 × 17½ × 22½ in.	51/8 × 17½ × 22½ in.
	(13 × 45 × 58 cm.)	(13 × 45 × 58 cm.)
Net Weight (UPS)	42 lb. (19.1 kg)	53 lb. (24.1 kg)
Net Weight (Transformer)	120 lb. (54.5 kg)	120 lb. (54.5 kg)
Net Weight (Battery Pack)	170 lb. (77.3 kg)	170 lb. (77.3 kg)

17	93-1979 (200207103)

Image 17

Tripp Lite SU6000RT3UPM Specifications, 93-1979, Model, SU10KRT3U, Input, Output, Operation, Indicators, Communications

Contents

Features Important Safety WarningsService/Warranty and Insurance SpecificationsMaintenance Warnings Important Safety WarningsBattery Warnings UPS Location WarningsMounting Single Unit InstallationMounting continued Back-to-Back InstallationMounting continued 2-Post Telecom InstallationSuggested Tower Mount Installation UPS Front Panel Controls FeaturesBattery Pack Rear Panel Features continuedUPS Rear Panel Isolation Transformer Rear PanelBattery Pack Rear Panel Features continuedUPS Rear Panel Isolation Transformer Rear PanelInstallation-No Isolation Transformer Notes on Hardwiring1 Hardwire your utility power source to your UPS’s input 2 Hardwire your UPS’s output to your equipment2 Hardwire your equipment to your isolation transformer’s Installation-With Isolation Transformer3 Select your input voltage. Hardwire your isolation transformer’s utility input to your utility power source4 Connect external battery packs to your UPS Installation-All Applications5 Connect communication cables to your UPS optional Low Battery6 Turn input to the UPS ON 7 Configure your UPS’s output8 Turn UPS output ON 9 To turn the UPS and transformer OFFStartup Self-Test OperationFailed Self-Test STARTED WITH AC INPUTOperation continued On Battery AlarmNormal Operation Overload MessagesShutdown Messages Bypass MessagesBYPASS VOLTAGE LCD DISPLAYService Service/Warranty and Insurance2-Year Limited Warranty Ultimate Lifetime Insurance Policy Valid in U.S. and Canada ONLYIndicators SpecificationsPhysical Specifications 93-1979