SECTION
11.After the cylinder is full, press the compressor power switch to the Off (O) position (FIGURE 4.6).
12.Grasp the cylinder assembly (FIGURE 4.6).
13.With the other hand, grasp the outer ring (sleeve) of the connector fillport and push DOWN (FIGURE 4.6).
14.Lift up on the cylinder assembly to remove from the connector fillport (FIGURE 4.6).
PUSH DOWN
Outer Ring
(Sleeve)
Cylinder | Cylinder | |
Assembly | ||
Fillport | ||
|
Power
Switch
Connector
CompressorFillport
FIGURE 4.6 Disconnecting the Cylinder from the Compressor
15.When the cylinder fillport is disconnected from the connector fillport, release the outer ring (sleeve) of the connector fillport (FIGURE 4.6).
16.Remove the cylinder from the compressor cradle (FIGURE 4.6).
