OPERATING INSTRUCTIONS
POWER SWITCH
1.Press power switch to the ON position. The power light (I/O), located on the control panel, will illuminate a GREEN light. The alarm will "beep" three (3) times indicating that the system is functioning properly (FIGURE 5).
On/Off (I/O)
Power Switch
FIGURE 5 - POWER SWITCH
FLOWRATE
1.Turn the flowrate knob to the setting prescribed by your physician or therapist.
WARNING
DO NOT change the L/min. setting on the flowmeter unless a change has been prescribed by your physician or therapist.
NOTE: To properly read the flowmeter, locate the prescribed flowrate line on the flowmeter. Next, turn the flow knob until the ball rises to the line. Now, center the ball on the L/min. line prescribed (FIGURE 6).
Flow knob
Ball
FIGURE 6 - ADJUSTING THE FLOWRATE- PLATINUM 5 WITH SENSO2®SHOWN
15
