Invacare JLS5 Removing the Swivel Bar/Cradle Attachment

Jasmine™ Scale JLS5 2Part No 1152408
Removing the Swivel Bar/Cradle Attachment
NOTE:Forthisprocedure,refertoFIGURE 1.
1. Removethesiderubbercaps.
NOTE:Supporttheswivelbarorcradleattachmentfromunderneathwhileremovingtheattachinghardware.
2. Removethesocketheadscrew,washer,bushings,toprubbercap,nylonspacers,washerandnut
thatattachtheswivelbarorcradleattachmenttotheboom.
NOTE:Whentheattachinghardwareisremoved,thepin,washerando‐ringwillbecomeloose.
NOTE:Savethesocketscrew,smallsteelwasherandlocknuttosecuretheJasmineScaletotheboom.
NOTE:Savetheremaininghardwareforfutureuseoftheswivelbarorcradleattachmentwithoutthescale.
FIGURE 1 Removing the Swivel Bar/Cradle Attachment
Top Rubber Cap
Side Rubber Cap
Nut
Washer
Nylon Spacer
Nylon Spacer
Side Rubber Cap
Socket Head Screw
Washer
Bushing
Swivel Bar
Bottom Rubber Cap
Pin
O-ring
Washer
Optional Cradle
Attachment
Bushing