Invacare MA65, MA60 manual Connecting the Power Cord

SECTION 2—OPERATION

Connecting the Power Cord

WARNING

DO NOT alter plug to fit a non-conforming outlet. Instead, have an electrician install a properly grounded 3-prong outlet. Failure to use the correct plug and outlet can result in a potential safety hazard.

CAUTION

Ensure that the power cord of the control unit is not pinched, or has any objects placed on it, and also ensure it is not located where it can be stepped on or tripped over.

1.Examine the hospital grade power cord supplied with the control unit.

2.Perform one of the following:

•If the plug is damaged - Call your supplier for a replacement hospital grade cord.

•If the plug is not damaged - Plug the end of the supplied hospital grade power cord into the power outlet on the side of the control unit.

3.Plug the other end of the plug into a properly grounded outlet on the wall.

NOTE: Once the unit is plugged in, an AMBER LED on the control unit is lit indicating that the system is in STAND BY mode.

Part No 1148137 13 MA60 Series