Invacare MA60, MA65 manual Using the Front Panel, Power Button

SECTION 2—OPERATION

Using the Front Panel

NOTE: For this procedure, refer to FIGURE 2.3.

	DETAIL “A” - MA60 FRONT PANEL
		Fowler		Low Pressure
Power	Alternating		Power
		Button		LED
Button	Pressure Button		Fail LED

Static Button					Lock/Alarm
				Max Inflate	Button
Soft Button	LCD Display
		Firm Button		Button
	DETAIL “B” - MA65 FRONT PANEL
			Fowler	Power	Low Pressure
Power		Alternating
			Button		LED
Button	Pressure Button			Fail LED

Static Button		Lock/Alarm
	Mode Button	Button
Soft Button LCD Display
	(Max Inflate/
Firm Button
	Low Air Loss)

FIGURE 2.3 Using the Front Panel

Power Button

1. To turn the control unit on or off, press and release the Power button ().

NOTE: Once the unit is plugged in, an AMBER LED on the control unit is lit indicating that the system is in STAND BY mode. Once the Power button is pressed and released, a GREEN LED illuminates indicating that the control unit is on.

NOTE: If the power comes on after a power outage, the control unit will go through its system initialization routine for a few seconds and then resume the desired function.

MA60 Series 14 Part No 1148137