SECTION 2—OPERATION
MA60 Series 12 Part No 1148137
Connecting the Hose

CAUTION

Ensure that the hose connecting the control unit to the mattress is routed such that
it cannot be stepped on, kinked, squeezed or otherwise damaged.
NOTE: For this procedure, refer to FIGURE2.2.
1. Locate the hose at the foot end of the mattress.
2. Locate the control unit connectors on the right side of the control unit.
3. Squeeze and hold the tabs on the hose connectors.
4. Insert the hose connectors into the control unit connectors.
5. Push the hose connectors into the control connectors until an audible click is heard.
NOTE: The audible click indicates that the hose connectors are properly engaged with the control
connectors.
FIGURE 2.2 Connecting the Hose
Hose
Connector
Hose
Control Unit
Connectors
Tab