SECTION
Connecting the Hose
CAUTION
Ensure that the hose connecting the control unit to the mattress is routed such that it cannot be stepped on, kinked, squeezed or otherwise damaged.
NOTE: For this procedure, refer to FIGURE 2.3.
1.Locate the hose at the foot end of the mattress.
2.Locate the control unit connector on the right side of the control unit.
3.Lift and hold the connector cover up.
4.Push the hose connector (Detail “A”) onto the control connector.
5.Ensure the hose connector is flush with the control unit connector.
Connector
Cover
Control Unit
Connector
Control
Unit
DETAIL “A”
Hose
Connector
Holes
FIGURE 2.3 Connecting the Hose
MA80 Series | 12 | Part No 1148138 |
