Invacare MA80, MA85 manual Connecting the Power Cord

SECTION 2—OPERATION

Connecting the Power Cord

WARNING

DO NOT alter plug to fit a non-conforming outlet. Instead, have an electrician install a properly grounded outlet. Failure to use the correct plug and outlet can result in a potential safety hazard.

CAUTION

Ensure that the power cord of the control unit is not pinched, or has any objects placed on it, and also ensure it is not located where it can be stepped on or tripped over.

NOTE: For this procedure, refer to FIGURE 2.4.

1.Examine the hospital grade power cord supplied with the control unit.

2.Perform one of the following:

•If the plug is damaged - Call your supplier for a replacement hospital grade cord.

•If the plug is not damaged - Plug the end of the supplied hospital grade power cord into the power outlet on the side of the control unit.

3.Plug the other end of the plug into a properly grounded outlet on the wall.

NOTE: Once the unit is plugged in, an AMBER LED on the control unit is lit indicating that the system is in STAND BY mode.

Control Unit

Power Outlet

FIGURE 2.4 Connecting the Power Cord

Part No 1148138 13 MA80 Series