Wiring Harnesses and Chargers

MKIV Electronics

NOTE: A - On 7/18/01 Lester 8 amp. battery chargers were reinstated. The square plug model was offered on chairs made before B - 2/20/95On 8/26/02. a (PTO) power take off connector was added to the wire harness. Item 24 sensor cable is included with the tilt

wire harness part number 1053833. C - Includes items 2-13

D - Before 2/20/95

E - After 2/19/95

F - The wire harness takes a quantity of 2 fuses G - Before 4/1/03

HI - -CTEAftercharger3/31/03introduced and standard on-chair 4/1/04. Used on Gel Cell or AGM (Absorbed Glass Mat) batteries. For wet I1 -cellCTEbatterieschargerreferlookstoexactlythe Lesterthe samechargeras. Dynamic's charger except for the company name that is silk screened on the

narrow side panel, where the charger plug is (hard wired) attached. Serial number starts with 04A00000001. J - CTE charger without the square plug adapter cord is for chairs equipped with a round plug charger connector

Form No. 93-37

72

To order call toll free 1-800-333-6900, or www.invacare.com

Page 73
Image 73
Invacare Power TigerTM manual Wiring Harnesses and Chargers