ViewSonic N2750W manual Installation, Insert Remote Control Batteries, Connecting with the antenna

Installation

1. Insert Remote Control Batteries

1 Remove the battery cover by pulling then lifting the knob on the cover.

2 Insert the batteries, corresponding to the (+) and (-) markings on the battery compartment. 3 Reattach the battery cover.

CAUTION

	Only use the specified AAA batteries.
	Do not mix new and old batteries. This may result in cracking or leakage,
	which may pose a risk of fire or lead to personal injury.
	Insert batteries according to (+) and (-) markings. Inserting the batteries incor-
	rectly may result in cracking or leakage, which may pose a risk of fire or lead to
	personal injury.
	Dispose of the battery in accordance with local laws and regulations.
E
	Keep the battery away from children and pets.
N
	When the remote control will not to be used for an extended period, remove
G
	the batteries.
L
I
S	2. Connecting with the antenna
H	Make sure the power is off before installing N2750w.
	Connect the LCD TV to TV antenna terminal or CATV box by 75-ohm coaxial cable.
	RF Cable or Adapter

ViewSonic N2750W 10