Samsung EC-NV20ZSBE/AS manual Copy To Card, Selecting Video out type, the memory card, Setup menu

Models: EC-NV20ZSBB/RU EC-NV20ZSBA/E2 EC-NV20ZBBG/AS EC-NV20ZSSA/E1 EC-NV20ZSBA/IT

1 102
Download 102 pages 44.95 Kb
Page 77
Image 77
Copy To Card

Setup menu 4 ( Selecting Video out type )

Copy To Card

This enables you to copy image files, movie clips and voice recording files to

Selecting Video out type

The Movie output signal from the camera can be NTSC or PAL.

the memory card.

[No]

: Cancels "Copy to Card".

[Yes]

: All images, movie clips and voice recording

NoFormat

Yes

Delete All

Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the camera is connected. PAL mode can support only BDGHI.

files saved in the internal memory are copied

to the memory card after the [Processing!]

message is displayed.

Copy to Card

Video Out

Reset

Exit:BACK

Connecting to an external monitor

In RECORDING/ PLAY mode, you can view the stored still images or movie clips by connecting the camera to an external monitor via the AV cable. When the camera is connected to an external monitor, the LCD monitor will be turned off automatically.

NTSC

 

Format

 

 

 

PAL

Delete All

 

 

 

Copy to Card

Video Out

Reset

Exit:BACK

When this menu is selected without inserting a memory card, you can select the [Copy To Card] menu but the menu can’t be run.

If there is not enough space available in the memory card to copy saved images in the internal memory (20MB), the [Copy To Card] command will copy only some of the images and display [Memory Full!] message. Then the system will return to the playback mode. Please be sure to delete any unnecessary files in the internal memory to free up space before inserting the memory card into the camera.

When you move the images that are stored in the internal memory to the memory card, the next number of file names will be created in the card to avoid duplication of the file name.

-When the [Reset] of the [File] setup menu is set : The copied file names start from after the last stored file name.

-When the [Series] of the [File] setup menu is set : The copied file names start from after the last captured file name. After completing [Copy To Card], the last stored image of the last copied folder is displayed on the LCD monitor.

Yellow - Video White - sound

76

Page 77
Image 77
Samsung EC-NV20ZSBE/AS Copy To Card, Selecting Video out type, The Movie output signal from the camera can be NTSC or PAL