Samsung EC-NV20ZBSA/E1, EC-NV20ZSBA/E3 manual Voice recording / Voice memo, Remote control range

Self-timer / Remote control

Remote control range

When you take a picture by using the remote control, refer to the illustrations shown alongside

about the remote control range.

[Shutter button on the remote control]

Replacing battery for the remote control

Make sure the + (positive) polarity is toward the top and the - (negative) polarity is toward the bottom while installing battery for the remote control. Replace battery for the remote control in the local service centre. Use the CR 2025 3V battery.

When taking a picture using the self-timer, the self-timer lamp works as follows : 2 second self-timer setting : The self-timer lamp blinks at 0.25 second

interval for 2 seconds.

10 second self-timer setting : The self-timer lamp blinks at 1 second interval for the first 7 seconds. It blinks at 0.25 second interval for the remaining 3 seconds.

If you operate the Back button during the self-timer operation, the self- timer function is canceled.

Use a tripod to prevent camera shake.

Voice recording / Voice memo

A voice can be recorded for as long as the available recording time(Max 10 hours) of the memory capacity allows. And you can add your voice-over to a stored still image.

Voice recording

1. Select a recording mode with the exception
of the Movie clip mode by rotating the mode dial.
2. Select the Voice recording menu by using	RECORD
the smart button.	MEMO
	OFF
3. Press the shutter button to record a voice.
- Press the shutter button once and voice is
recorded for as long as the available
recording time allows (Max 10 hours).
The recording time will be displayed on the LCD
monitor. Voice will still be recorded if the shutter	RECORD
	MEMO
button is released.
	OFF
- If you wish to stop recording, press the shutter
button again.
- File type : *.wav

40