Samsung EC-NV20ZSBA/US, EC-NV20ZSBA/E3, EC-NV20ZSBA/FR System Requirements, About the software

System Requirements

For Windows	For Macintosh
PC with processor better than Pentium
450MHz (Pentium 800MHz	Power Mac G3 or later
recommended)
Windows 98SE/2000/ME/XP/Vista	Mac OS 9.0 ~ 10.4
Minimum 128MB RAM (512MB	Minimum 64MB RAM
recommended)
	(256MB recommended)
200MB of available hard disk space
	110MB of available hard-disk space
(1GB recommended)
USB port	USB port
CD-ROM drive	CD-ROM drive
1024x768 pixels, 16-bit color display
compatible monitor (24-bit color display
recommended), Microsoft DirectX 9.0 or
later

About the software

After inserting the CD-ROM provided with this camera into the CD-ROM drive, the following window should automatically run.

Before connecting the camera to the PC, you should first install the camera driver.

Screen Captures illustrated on this manual is based on English Edition of Windows.

Camera driver : This enables images to transfer between the camera and PC.

This camera uses the USB Storage Driver as the camera driver. You can use the camera as a USB card reader. After installing the driver and connecting this camera to the PC, you can find [Removable Disk] in [Windows Explorer] or [My Computer]. A USB Storage Driver is provided only for Windows. A USB Driver for MAC is not included with the Application CD. You can use the camera with Mac OS 9.0 ~ 10.4.

XviD codec : This allows movie clips (MPEG-4) recorded with this camera to be played back on a PC.

To play back a movie clip recorded with this camera, you must install the XviD codec. If a movie clip recorded with this camera does not play well, install this codec. This software is only compatible with Windows.

85