Samsung EC-NV20ZSBA/TW White balance, Using the Custom White Balance, Daylight, Cloudy, Tungsten

White balance

The white balance control allows you to adjust the colours to appear more natural. When a menu except the AWB (Auto White Balance) is selected, you can only select the negative color effect.

White Balance menu is available in the Program, Manual and ASR, Movie clip mode.

AUTO	: The camera automatically
	selects the appropriate white
	balance settings, depending
	on the prevailing lighting
	conditions.
DAYLIGHT	: For taking images outside.
CLOUDY	: For taking images under a

Using the Custom White Balance

White balance settings may vary slightly depending on the shooting environment. You can select the most appropriate white balance setting for a given shooting environment by setting up the custom white balance.

1. Select the CUSTOM ( ) menu of the White Balance and place a sheet of white paper in front of the camera so that the LCD monitor shows only white.

[White paper]

	cloudy and overcast sky.
Fluorescent H	: For shooting under daylight fluorescent types of three
	way fluorescent lighting.
Fluorescent L	: Shooting under white fluorescent lighting.
TUNGSTEN	: For shooting under tungsten (standard light bulb) lighting.
CUSTOM	: Allows the user to set the white balance according to the
	shooting condition.

Different lighting conditions may cause a colour cast on your images.

2. OK menu button : selects pre-saved custom white

	balance.
BACK button	: cancels the custom white
	balance.
Shutter button	: stored the new custom white
	balance.

-The custom white balance value will be applied, starting with the next picture you take.

-The user configured white balance will be remain effective until it is overwritten.

Measure : Shutter

OK

Former: OK Cancel : BACK

43