Invacare R2 #1 Back Pan w/ Vinyl Edge Trim

Metal Curved Back Assembly

NOTE: Curved Back mounts only to back canes without a 10 degree bend.

NOTE: As of 8/15/08 the Curved Back material changed from ABS Plastic to Metal as inventory runs out.

You must ask the customer if they have an ABS Plastic or the Metal Curved Back model when replacing

components. All service replacement Back Assemblies with Hardware shipped will be metal. New

Headrest Mounting Hardware is required when replacing an ABS Curved Back with a Metal Curved Back.

Item

Number Part Number DescriptionNote

Quantity Per

Package Assembly

See Chart #1 Back Pan w/ Vinyl Edge Trim 16"-18" Wide 1 11

See Chart #1 Back Pan w/ Vinyl Edge Trim 19"-22" Wide 1 11

See Chart #2 Back Cushion Assembly 16"-18" Wide 1 12

See Chart #2 Back Cushion Assembly 19"-22" Wide 1 12

See Chart #3 Back Assembly with Hardware 16"-18" Wide 1 13

See Chart #3 Back Assembly with Hardware 19"-22" Wide 1 13

1125723 Kit, Hook Fastener w/ Adhesive Back 1 14 A

1125724 Trim, Edge, Cut-To-Length, Vinyl Black (96" L) 1 15

A - Hook Fastener Adhesive Kit is used to attach the Back Cover to the Back Pan and must be ordered when a new Back Pan

or Back Assembly is requested.

NOTE:

#1 Back Pan w/ Vinyl Edge Trim - 16"-18" Wide

Overall

Back Height Material

Back Height 16" Wide 17" Wide 18" Wide

11578481157837115782611"16"

11578491157838115782712"17"

11578501157839115782813"18"

11578511157840115782914"19"

11578521157841115783015"20"

11578531157842115783116"21"

11578541157843115783217"22"

11578551157844115783318"23"

11578561157845115783419"24"

NOTE: Hook Fastener Adhesive Kit must be ordered when a Back Pan or Back Assembly is requested. This will allow the Loop Fastener

Adhesive on the Back Cover to attach properly.

To order call toll free 1-800-333-6900, or www.invacare.com

Form No. 01-039