Metal Curved Back Assembly
NOTE: Curved Back mounts only to back canes without a 10 degree bend.
NOTE: As of 8/15/08 the Curved Back material changed from ABS Plastic to Metal as inventory runs out.
You must ask the customer if they have an ABS Plastic or the Metal Curved Back model when replacing
components. All service replacement Back Assemblies with Hardware shipped will be metal. New
Headrest Mounting Hardware is required when replacing an ABS Curved Back with a Metal Curved Back.
#1 Back Pan w/ Vinyl Edge Trim - 19"-22" Wide
Overall
Back Height
Material
Back Height 19" Wide 20" Wide 21" Wide 22" Wide
115789211578811157870115785911"16"
115789311578821157871115786012"17"
115789411578831157872115786113"18"
115789511578841157873115786214"19"
115789611578851157874115786315"20"
115789711578861157875115786416"21"
115789811578871157876115786517"22"
115789911578881157877115786618"23"
115790011578891157878115786719"24"
NOTE: Hook Fastener Adhesive Kit must be ordered when a Back Pan or Back Assembly is requested. This will allow the Loop Fastener
Adhesive on the Back Cover to attach properly.
#2 Back Cushion Assembly - 16"-18" Wide
Overall
Back
Height
Material
Back
Height 16" Wide 17" Wide 18" Wide
11602291160218116020712-1/2"16"
11602301160219116020813-1/2"17"
11602311160220116020914-1/2"18"
11602321160221116021015-1/2"19"
11602331160222116021116-1/2"20"
11602341160223116021217-1/2"21"
11602351160224116021318-1/2"22"
11602361160225116021419-1/2"23"
11602371160226116021520-1/2"24"
NOTE: Back cover and foam are sold as a Back Cushion Assembly only.
33
To order call toll free 1-800-333-6900, or www.invacare.com
Form No. 01-039