Invacare R2 #3 Back Assembly with Hardware - 16" Wide to 18" Wide, #3 Back Assembly with Hardware - 19" Wide to 22" Wide

ABS Curved Back Assembly
NOTE: ABS curved back mounts to back canes without a 10 degree bend.
NOTE: As of 8/15/08 the Curved Back material changed from ABS Plastic to Metal as inventory runs out.
You must ask the customer if they have an ABS Plastic or the Metal Curved Back model when replacing
components. All service replacement Back Assemblies with Hardware shipped will be metal. New
Headrest Mounting Hardware is required when replacing an ABS Curved Back with a Metal Curved Back.
#3 Back Assembly with Hardware - 16" Wide to 18" Wide
Overall
Back Height
Material
Back Height
ABS Plastic
Curved
Material Back
Height
Metal Curved 16" Wide 17" Wide 18" Wide
11069931106983110697311"12"16"
11069941106984110697412"13"17"
11069951106985110697513"14"18"
11069961106986110697614"15"19"
11069971106987110697715"16"20"
11069981106988110697816"17"21"
11069991106989110697917"18"22"
11070001106990110698018"19"23"
11070011106991110698119"20"24"
NOTE: Hook Fastener Adhesive Kit must be ordered when a Back Pan or Back Assembly is requested. This will allow the Loop Fastener
Adhesive on the Back Cover to attach properly.
#3 Back Assembly with Hardware - 19" Wide to 22" Wide
Overall
Back Height 22" Wide
Material
Back Height
ABS Plastic
Curved
Material Back
Height
Metal Curved 19" Wide 20" Wide 21" Wide
110703311070231107013110700311"12"16"
110703411070241107014110700412"13"17"
110703511070251107015110700513"14"18"
110703611070261107016110700614"15"19"
110704211070271107017110700715"16"20"
110704311070281107018110700816"17"21"
110704411070291107019110700917"18"22"
110704511070301107020110701018"19"23"
110704611070311107021110701119"20"24"
NOTE: Hook Fastener Adhesive Kit must be ordered when a Back Pan or Back Assembly is requested. This will allow the Loop Fastener
Adhesive on the Back Cover to attach properly.
30
To order call toll free 1-800-333-6900, or www.invacare.com
Form No. 01-039