ABS Curved Back Assembly
(16"-20" Wide) - TDX SC
NOTE: Hook Fastener w/ Adhesive Back Kit must be ordered when a Back Pan or Back Assembly is
requested. This will allow the Loop Fastener w/ Adhesive on the Back Cover to attach properly.
NOTE: ABS Curved Back mounts only to back canes without a 10 degree bend.
NOTE: Back cover and foam are sold as a Back Cushion Assembly only.
Item
Number Part Number DescriptionNote
Quantity Per
Package Assembly
See Chart #1 Back Pan 16"-18" 1 11
See Chart #1 Back Pan 19"-20" 1 11
See Chart #2 Back Cushion Assembly 16"-18" 1 12
See Chart #2 Back Cushion Assembly 19"-20" 1 12
See Chart #3 Back Assembly with Hardware 16"-18" 1 13
See Chart #3 Back Assembly with Hardware 19"-20" 1 13
1125723 Kit, Hook Fastener w/ Adhesive Back 1 1A
A - Not Shown. Hook Fastener w/Adhesive Back Kit is used to attach the Back Cover to the Back Pan and must be ordered
when a new Back Pan or Back Assembly is requested.
NOTE:
42
To order call toll free 1-800-333-6900, or www.invacare.com
Form No. 08-077