Invacare TDX SPREE #1 Back Assembly without Hardware, #2 Back Pan with Vinyl Edge Trim

Conventional Back without Mounting Hardware
(16"-20" Wide) TDX SC & (16" Wide) TDX SPREE
Only the Back Assembly needs to be replaced when changing back heights.
NOTE: Hook Fastener w/ Adhesive Back Kit must be ordered when a Back Pan or Back Assembly is
requested. This will allow the Loop Fastener w/ Adhesive on the Back Cover to attach properly.
#1 Back Assembly without Hardware
Overall
Back
Height 20" Wide
Material
Back
Height 16" Wide 17" Wide 18" Wide 19" Wide
1125568112556711255661125565112556415"20"
1125577112557611255751125574112557316"21"
1125586112558511255841125583112558217"22"
1125595112559411255931125592112559118"23"
1125604112560311256021125601112560019"24"
#2 Back Pan with Vinyl Edge Trim
Overall
Back
Height 20" Wide
Material
Back
Height 16" Wide 17" Wide 18" Wide 19" Wide
1124606112459911245921124585112457815"20"
1124607112460011245931124586112457916"21"
1124608112460111245941124587112458017"22"
1124609112460211245951124588112458118"23"
1124610112460311245961124589112458219"24"
35
To order call toll free 1-800-333-6900, or www.invacare.com
Form No. 08-077