Invacare TDX SPREE manual #3 Back Cushion Assembly 16-20 Wide

Conventional Back without Mounting Hardware

(16"-20" Wide) TDX SC & (16" Wide) TDX SPREE

Only the Back Assembly needs to be replaced when changing back heights.

NOTE: Hook Fastener w/ Adhesive Back Kit must be ordered when a Back Pan or Back Assembly is requested. This will allow the Loop Fastener w/ Adhesive on the Back Cover to attach properly.

#3 Back Cushion Assembly 16"-20" Wide

Overall			Material		16" Wide		17" Wide	18" Wide	19" Wide			20" Wide
Back			Back
Height			Height
20"			15"		1097397		1097398	1097399	1097400			1097401
21"			16"		1097404		1097405	1097406	1097407			1097408
22"			17"		1097411		1097412	1097413	1097414			1097415
23"			18"		1097418		1097419	1097420	1097421			1097422
24"			19"		1097425		1097426	1097427	1097428			1097429
Back cover and foam are sold as a back				cushion assembly		only. Chart reflects chair width and the actual back cushion width will be 1" wider
than the chair width.
Item											Quantity Per
Number		Note	Part Number		Description					Package			Assembly
1			See Chart		#1 Back Assembly without Hardware						1		1
2			See Chart		#2 Back Pan with Vinyl Edge Trim						1		1
3			See Chart		#3 Back Cushion Assembly						1		1
4		A	1125723		Kit, Hook Fastener w/ Adhesive Back						1		1
5			1125724		Edge Trim, Vinyl Black (96" Long) Cut-To-Length						1		1
NOTE: A	- Hook Fastener w/ Adhesive Back Kit is used to attach the Back Cover to the Back Pan and must be ordered when												a new
		Back Pan or Back Assembly is requested.

Form No. 08-077

36

To order call toll free 1-800-333-6900, or www.invacare.com