- 20 -
9.0 General Maintenance & Safety
BATTERY TESTING |
| |
i) | Battery Case Draw Test | Drag second lead across |
|
| |
|
| battery case |
1. | Inspect battery for signs of corrosion, moisture and/or dirt that could |
|
| lead to unnecessary discharge of the battery. |
|
2. | Test with Voltmeter by placing one lead on the Positive (+) battery |
|
| terminal |
|
3. | Drag the other lead across the battery case (in different locations). |
|
4. | Voltmeter should read 0 (zero) if the battery is not discharging | Place lead on positive terminal |
|
| |
ii) No Load Voltage Testing
Test to determine the state of charge of the battery. Refer to the illustration below for testing instructions.
!WARNING! Never attempt a voltage measurement with a test lead in the AMP (A) or MILLIAMP (mA) input terminal. You may be injured or cause damage to the voltmeter.
CONTROLLER
RED
MOTOR
BLACK
TRD0000, TRx Owner’s Manual- Rev. 5.0, January 20, 2005
